S

View all results

← Back to albums

Don't

  • Don't turn your tower into a bird's nest.
    Don't turn your tower into a bird's nest.
  • And don't turn the datalogger enclosure into a beehive.
    And don't turn the datalogger enclosure into a beehive.
  • Don't aim at the anemometer with your shot gun! Wind station in rural New South Wales, Australia.
    Don't aim at the anemometer with your shot gun! Wind station in rural New South Wales, Australia.
  • Don't violate the calibration by using a geometry of the stub mast different from that used during calibration.
    Don't violate the calibration by using a geometry of the stub mast different from that used during calibration.
  • Don't put adhesive tape on your anemometer
    Don't put adhesive tape on your anemometer
  • Don’t forget aligning your sensors, and don’t deploy non-axial symmetric sensors conflicting with the IEC 61400-12-1
    Don’t forget aligning your sensors, and don’t deploy non-axial symmetric sensors conflicting with the IEC 61400-12-1
  • Don’t forget aligning your sensors, and don’t deploy non-axial symmetric sensors conflicting with the IEC 61400-12-1
    Don’t forget aligning your sensors, and don’t deploy non-axial symmetric sensors conflicting with the IEC 61400-12-1
  • Just DO it ! Use axis symmetric sensors and mounting according to IEC 61400-12-1
    Just DO it ! Use axis symmetric sensors and mounting according to IEC 61400-12-1
  • Just don't !
    Just don't !
  • Don't forget your helmet.
    Don't forget your helmet.
  • Don't fence in your anemometer.
    Don't fence in your anemometer.
  • Don't perform unauthorized lubrication.
    Don't perform unauthorized lubrication.
  • Don't add obstructions on the support post.
    Don't add obstructions on the support post.
  • And don't add obstructions on the anemometer.
    And don't add obstructions on the anemometer.